200 Leg Extension/Curl. 3" Construction. Heavy Padding.
202 Leverage Incline Press. 30 Degree Incline. Adj. Seat Height. Adj. stops
on Arms. Rotational Stop Handles for multi-positions of handles (optional). Fixed
3 position handles is standard. 1" Bearings on Independent Arm Mechanism.
3" Construction. Heavy Duty Padding. Both Plate Load and Resistance Band
capabilities. Use Plates or Bands or Both. One set of Mini-Bands supplied.
No. 201 Leverage
Shoulder Press. Adj. Seat Height. Adj. Backrest forward and back. Three
position handles. (Rotational Optional). Independent Arm Mechanisms on 1"
Bearings. Plate Load and Resistance Band capability. You can use Plates or Bands
or both. 3" Construction. Back Pad will adjust from Behind Neck to Front
Presses. One set of Mini-Bands supplied.
204 Elite Multi Press with Counterbalance. (Smith Machine) with a 7 degree
Free Floating or locked 3 degree forward or back or straight feature. Available
counterbalanced (bar=15lbs) or non (bar=70lbs). Ballbearing Rotation on bar. 1-1/4"
Lineal Bearing guides. Weight storage. 3" construction.
207 Power Squat Plate load Squat Machine for regular squats and front
squats. 3"x 3" Construction. Three position starting for various height of users.
Three position lower racking for bottoming out of movement. Adjustable angle on
Urethane Coated Foot Plate. Ball bearing hand release mechanism. Ball bearing
pivot mechanism. Heavy Duty padding.
208 Power Runner. Independent Leg Mechanism that simulates the act of running.
Adj. Shoulder/Chest pad for body Length of the user. Pillow Block Bearings on
mechanisms. Rubber Bumper Stops. Heavy Duty Padding. Constructed of 2-1/2"
and 2" tubing. (3" available). Great Machine for building Power and
Quickness in Running. Works Quads, Glutes and Calves. Variable Resistance due
to plate loaded leverage arm. Greater resistance at full extension of movement.
210 New Reclining Leg Press. The Old No. 210 Reclining Leg press in newer
technology. Lineal Bearings of 1-1/2" diameter for a smoother movement. 3" and
3-1/2" construction. Two welded inside weight pegs and two outside weight pegs
are bolted on with 1" Bolts. Adj. angle on bench as well as adjustable shoulder
pads. Angled coated Foot Plate. Two position stop mechanism that is a Dual rotational
stop mechanism activated by one side.
212 Leg Press: 45 Degree. Adj. Back Pad. Two position release on carriage.
Five position bottom stop on carriage. Four weight pegs on carriage. Weight storage.
1-1/2" Lineal Bearings. Large Rubber Coated Foot plate. 3" Construction.
Heavy Duty Padding.
213 Standing Calf. Features 3" Square Tubing. Base Up Off Floor. Bolt
Down Tabs Included.
214 Seated Calf. Tilt Seat model. Adj. Knee/Leg Pads. Angled Foot plate
for pre-stretch and comfort. 4"x24" Rubber coated foot plate. Dual Weight
pegs. 3" Construction. Heavy Duty Padding.
215 Leverage Row. Adj. foot plate for size of user. Swivel Handle Mechanism
for an unrestricted movement. U-Joint Mechanism. Two Position handles. Two position
Bar Rack. Angled Heavy Duty pad for isolation of movement. 3" Construction.
216 Neck Machine Plate load model with adj. seat height. Shown with optional
adj. Body Isolation Pad. Four positions by just turning around on the seat and
using the handles on the seat. Large revolving head pad. 3" x 3" square tubing
construction. 1" ball bearing mechanism
217 Plate Load Dip Machine. 3" Construction with an adjustable seat height,
leg pad & an adjustable stop on the mechanism to set the starting height as desired.
Large Angled handles for variation of movement. 1-1/4" Ball Bearing mechanism.
Large Threaded rubber stop for fine adjustment of stop mechanism. Powder Coated.
Heavy Duty Foam padding. Will handle 45lb Olympic Plates or Standard plates as
219 Deadlift Machine. Adj. height on mechanism. Go lower than an Olympic
bar and in 2" increments to 8" above. Rubber coated platform. 1-1/2"
Ballbearing mechanism. Do deadlifts without bar dragging up legs. Do Bent Over
Rows and Shrugs. 3" construction.
221 Trap Machine. Adj. height on mechanism. Rotational extra long handles.
Rubber cushion stops. V-shape in order to walk into for proper body positioning.
Do trap shrugs in front, side and rear. 3" construction. Plate loading machine.
223 Multi-Press (Smith) Machine. Counterbalanced Model. Bar weighs 10lbs
due to Counterbalance mechanism. Adj. stops. 1,200lb Rated Olympic Bar. 1-1/4"
Lineal Bearings. Ballbearing Bar Rotation. 1" Hooks. NO WELDING TO BAR. Weight
Storage. Bench not included. 3" Construction.
225 Plate Load Hyper-Extension & Glute/Ham. A combination Hyper-extension
and Glute/Ham machine with a plate load mechanism for added resistance when doing
Hyper-extensions. No need to hold plates against your chest for added resistance.
In the bent over stage, just cup your arms under the padded roller for added resistance
during the exercise. With the added footplate, you can do Glute/Ham exercises
without the plate load feature. A combination Hyper-extension and Glute/Ham exercise
can be done using the plate load feature. Features an adjustable footplate with
leg pads both up and down and forward and back. A large rounded pad with heavy
padding is standard and a split two piece pad is optional.
227 Hip Kicker: Hip & Leg Machine. Adj. stop on the weight arm for
a great or lesser range of motion. Adj. height on arm pad. Ballbearing mechanism.
Easy to enter and exit. Counterbalanced mechanism. Available in a 2" model
or 3" as shown.
229 Ultra Power Runner. Power runner with adj. foot pedals, pad length,
pad height, and rotation on pads. Works the same as the standard Power Runner
but with the ability to change body position to work at slightly different angles.
Good for rehab. Features a gas ram to help lift for the height adjustment on the
pad. 2-1/2" & 2" construction. Heavy duty padding. Ballbearing mechanism.
230 70 Degree Leg Press Adj. Shoulder Pads and angle on body pad. Two
position release on carriage. 5 position bottom stops on carriage. Four Weight
Pegs on Carriage. Weight Storage. 1-1/2 Lineal Bearings with 1-1/2 case hard shafts.
Large Rubber Coated foot plate. 3" Construction. Heavy Duty Padding.
231 Independent Arm Leverage Row. Dual Arm Mechanism that can be used independent
or locked together as one single mechanism. Swivel Two Position Handles. Adj.
height on foot plate. Dual U-Joint Mechanism. Two Position Racking Pegs. Heavy
Duty Padding. 3" Construction.
232 Wrist/Forearm Roller. Wrist/Forarm developer that takes the load
off of the shoulders when doing Wrist/Forarm roller movement. Upright frame supports
the Polyurethane coated (Rino Lining) 2" diameter cylinder. Ballbearing rotation.
3" Square tubing. Plate storage. Heavy Duty strap (Automotive Towing Strap) that
is bolted to the cylinder for weight pulling rotation.
233 Seated Trap Machine Plate load Seated Trap Machine with an adjustable
seat for various arm lengths. V-Shaped Handles for various width of use. Larger
handles for comfort and to develop grip. 1-1/4" Ball Bearing rotation mechanism.
Rubber stop. 3" x 3" square tubing construction.
234 Seated Leverage Row Plate load Independent Arm mechanism. Adjustable
Seat Height. Adjustable Chest Pad for arm length. Ball Bearing mechanism. 3" square
tubing. Foot Plates to take pressure off of the chest. Ten Degree movement change
(start narrow and end 10 Degrees wider from the start to finish of the movement)
Two position hand grip (pictured are optional multi-grip handles at extra cost)
Heavy to Light variable resistance during the movement.
235 Trap Shrugger 3" x 3" Square Tubing. Knurled Handles. Solid 1-15/16"
weight pegs. Can be custom built to you desired height of the Knurled handles
to the floor.
236 Combination Isolation Row/Deadlift/Shrug/Squat Dual
purpose machine. Independent Arm. Use plates and or Bands. Adj. bed line coated
foot plate for the different height users. Adj. chest pad for arm length. 3"
square tubing construction. Sealed Ball Bearing mechanism. Rubber Bumper stops.
48" wide x 57" long (longer int he Deadlift Position). You can do Isolation
Rows and flip the arms over to do Deadlift, Shrugs and Squats (by holding onto
the handles and squatting). Plate Load or Rubber Bands or both. Features an anti
friction roller for the Band use. Will go through any doorway due to the two bold
construction that holds the three sections together. Rotational UHMW hand grips
as well as Band Roller.
237 Plate Load Abdominal Crunch. Adj. Chest Pad and adjustment on arm mechanism.
3" Construction. Ballbearing mechanism.
238 COMBINATION VIKING PRESS & STANDING CALF. Combination plate load standing
Viking Press with two position handles and a Standing Calf with an angled, Rino,
Truck Bed Liner coated, pre-stretch, foot plate. Adjustable height on mechanism.
Heavy Padding. Floor Plate to stand on when doing the Viking Press to prevent
any movement of the machine. All ball bearing mechanism. 3" square tube. Starting
Weight, without plates, is approx. 80lbs on the Viking press.
239 Independent Arm Pullover. New Plate Load Independent Arm Pullover.
Adjustment on the mechanism for the position of the start of the movement. Handles
swivel to compensate for any out of body alignment. Adjustable Seat and Backrest.
Ball Bearing rotation on the mechanism. Variable resistance Cam. Compact design.
Can use one arm at a time or both or alternate. 3" square tube heavy duty construction.
Reclining Leg Press (25 years ago). Adj. Angle on Pad. Adj. Shoulder Pads.
Two position stop on carriage. Dual Release Mechanism is activated by one hand
on one side. HEAVY DUTY OLD STYLE OF LEG PRESS. 3" Construction.